BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Page: 281 / 444

play, the following needs to be noted when
parking next to other objects:
Because of the perspective, higher, protruding
objects may be closer than they appear on the
Control Display.
Setting brightness and contrast
Brightness and contrast can be adjusted with
Surround View or Panorama View switched on.
1. Move the Controller to the right, if needed.
2. "Camera image"
3. Select the desired setting.
Functional limitations
The system can be used only to a limited ex-
tent in the following situations:
▷ In poor light.
▷ In case of soiled cameras.
▷ With a door open.
▷ With the tailgate open.
▷ With exterior mirrors folded in.
Areas with gray hatching with an icon in the
camera image identify areas that are currently
not shown, such as an open door.
System limits
System limits of the sensors
Additional information:
▷ Cameras, refer to page 39 .
Non-visible areas
Because of the camera angle, the areas under
the vehicle cannot be viewed by the cameras.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
Some assistance functions also take into con-
sideration data from the Park Distance Control.
Follow the notes in the Park Distance Control
chapter.
The objects displayed on the Control Display
may be closer than they appear. Do not esti-
mate the distance from the objects on the dis-
play.
Additional information:
Park Distance Control, refer to page
260 .
Malfunction
A camera failure is displayed on the Control
Display.
A yellow icon is displayed and the
detection range of the malfunctioning
camera is displayed in black on the
Control Display.
Panorama View
Principle
Panorama View gives you an earlier view of
crossing traffic at blind driveway exits and in-
tersections.
General information
Road users concealed by obstacles to the left
and right of the vehicle can only be detected
relatively late from the driver's seat. The cam-
eras in the front and rear capture the side
areas around the vehicle to improve the view.
Yellow lines in the screen display mark the
front and rear end of the vehicle.
Seite 281
Driver assistance systems CONTROLS
281
Online Edition for Part no. 01405A604A9 - VI/22