BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 39

Page: 39 / 444

Sensors of the vehicle

Vehicle features and options

This chapter describes all standard, country-

specific and optional features offered with the

series. It also describes features and functions

that are not necessarily available in your vehi-

cle, e.g., due to the selected options or coun-

try versions. This also applies to safety-re-

lated functions and systems. When using these

functions and systems, the applicable laws

and regulations must be observed.

Overview

Depending on the equipment, the following

cameras and sensors are installed in the vehi-

cle:

▷

Front camera.

▷

Cameras behind the windshield.

▷

Top view cameras.

▷

Rearview camera.

▷

Front radar sensor.

▷

Radar sensors, side, front.

▷

Radar sensors, side, rear.

▷

Ultrasonic sensors in the front/rear bump-

ers.

▷

Ultrasonic sensors, side.

Keep the vehicle cameras and sensors, as well

as surrounding areas, clean and unobstructed.

Cameras

Front camera

The front camera is located in the radiator

grille.

Cameras behind the windshield

The cameras behind the windshield are lo-

cated near the interior mirror.

Seite 39

Sensors of the vehicle

CONTROLS

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual, Page: 39 / 444

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews: