BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 22

Page: 22 / 444

Set-up and use

Seats, mirrors and steering

wheel

Electrically adjustable seats

Backrest width

Thigh support

Forward/backward, height, seat tilt

Upper backrest

Backrest tilt, head restraint

Lumbar support

Adjusting the head restraint

Adjusting the height

Press switch up or down.

Adjusting distance

▷

Back: press the button and push the head

restraint toward the rear.

▷

Forward: pull the head restraint toward the

front.

After setting the distance, make sure that the

head restraint engages correctly.

Side extensions

Fold the side extensions forward to increase

side support.

Seite 22

QUICK REFERENCE

Set-up and use

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands