BMW X1 - PRODUCT CATALOGUE, Owner'S Manual

Page: 121 / 314

▷ Unintentional shifting from selector lever po‐
sition P into another selector lever position.
1. To release the selector lever lock: with the
brake pedal depressed, press the button on
the front of the selector lever.
2. Move the selector lever into the desired posi‐
tion.
Engaging selector lever
positions: with a tap-operated
selector lever
General information
To prevent the vehicle from creeping after you
select a drive mode, maintain pressure on the
brake pedal until you are ready to start.
Functional requirements
Only when the brake pedal is depressed is it
possible to change from selector lever position P
to another selector lever position.
Depending on the transmission version, the en‐
gine may have to be running too.
The selection lever position P cannot be
changed until all technical requirements are met.
Engaging selector lever position D,
N, R
A selector lever lock prevents the following faulty
operation:
▷ Unintentional shifting into selector lever posi‐
tion R.
▷ Unintentional shifting from selector lever po‐
sition P into another selector lever position.
1. Fasten driver's safety belt.
2. Press and hold the button to release the se‐
lector lever lock.
3. Push the selector lever in the desired direc‐
tion, past a resistance point, if needed. The
selector lever automatically returns to the
center position when released.
Seite 121
Driving
CONTROLS
121
Online Edition for Part no. 01402896498 - X/18