3.
Wrap the empty sealant container and con‐
nection hose in suitable material to avoid
dirtying the trunk.
4.
Stow the Mobility System back in the vehi‐
cle.
Distributing the sealant
Immediately drive approx. 5 miles/10 km to en‐
sure that the sealant is evenly distributed in the
tire.
Do not exceed a speed of 50 mph/80 km/h.
If possible, do not drive at speeds less than
12 mph/20 km/h.
To correct the tire inflation pressure
1.
Stop at a suitable location.
2.
Screw the connection hose onto the tire
valve stem.
3.
Attach the connection hose directly to the
compressor.
4.
Insert the connector into a power socket
inside the vehicle.
5.
Correct the tire inflation pressure to
2.5 bar.
▷
Increase pressure: with the ignition
turned on or the engine running, switch
on the compressor.
▷
To reduce the pressure: press the but‐
ton on the compressor.
Continuing the trip
Do not exceed the maximum permissible
speed of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor.
Reinitialize the Tire Pressure Monitor.
Replace the nonworking tire and the sealant
container of the Mobility System as soon as
possible.
Snow chains
Fine-link snow chains
The manufacturer of your vehicle recommends
use of fine-link snow chains. Certain types of
fine-link snow chains have been tested by the
manufacturer of the vehicle and recommended
as road-safe and suitable.
Information regarding suitable snow chains is
available from a dealer’s service center or an‐
other qualified service center or repair shop.
Seite 195
Wheels and tires
Mobility
195
Online Edition for Part no. 01 40 2 964 303 - VI/15
Summary of Contents for X1 2015
