BMW R 1200RT, Rider'S Manual

Page: 76 / 190

Open case ( 140).
First turn the key in the top-
case lock 45° past the LOCK
position, then turn it to the dot
position and press in the lock
barrel.
The release lever pops open.
Logon of remote controls
If a remote control has been mis-
laid and a replacement acquired
or if you are going to use an ad-
ditional remote control, you must
invariably log on all the remote
controls in the set.
Enable logon of the remote
controls as follows:
Switch on ignition.
Press button 2 on the remote
control three times.
One acoustic signal sounds.
Within ten seconds, switch off
the ignition.
You can now proceed to log on
all the remote controls.
Step through the following pro-
cedure with each remote con-
trol in turn:
Press and hold down buttons 1
and 2 until LED 3 stops flash-
ing.
LED
3 flashes for about ten
seconds.
Release buttons
1 and 2 .
LED 3 lights up.
Press button 1 or button 2 .
One audible signal sounds,
LED
3 goes out.
To complete logon:
Switch off ignition.
Three acoustic signals sound.
Logon is also ended when
four remote controls have been
logged on.
4
74
z Operation