BMW R 1200 S, Rider'S Manual

Page: 91 / 140

Fitting rear wheel stand
Use screws 1 to set the
rear-wheel stand to the de-
sired height.
Remove retaining disc
2 . To
do so, press release but-
ton
3 .
Push the rear-wheel stand
from the right onto the rear
axle.
Push the retaining disc on
from the left, while holding
the unlock button down.
Grip the rear grab handle of
the motorcycle of the mo-
torcycle with your left hand
and use your right to grip
the lever of the rear wheel
stand
4 .
Lift the motorcycle upright,
simultaneously pressing the
lever down until the stand
supports the motorcycle in
the upright position.
Press the lever down to the
ground.
Bulbs
General instructions
A warning appears in the mul-
tifunction display if a bulb is
defective.
A defective bulb places
your safety at risk be-
cause it is easier for other
7
89
z Maintenance