BMW R 1200 GS ADVENTURE, Manual

Page: 117 / 177

Raise the front wheel, install
quick-release axle
8 and
tighten to specified tightening
torque.
Quick-release axle in axle
holder
50 Nm
Tighten axle clamping screw 7
to the specified torque.
Clamp screw of quick-
release axle
19 Nm
Remove the front-wheel stand.
with OE BMW Motorrad Integral
ABS:
Insert ABS sensor 2 into its
bore and install screw 1 .
The cable of the ABS
sensor could chafe through
if it comes into contact with the
brake disc.
Make sure that the ABS sensor
cable is routed correctly.
Clip the ABS sensor cable into
clip
10 to make sure it remains
correctly routed.
Ease the brake calipers on to
the brake discs.
Install securing screws 3 on
left and right and tighten to
specified tightening torque.
Brake caliper to slider
tube
30 Nm
Remove the adhesive tape
from the wheel rim.
Braking efficiency is im-
paired if the brake pads are
not correctly bedded against the
discs.
Before riding off, always check
that the brakes bite as soon as
8
115
z Maintenance