BMW R 1200 GS ADVENTURE Manual Download Page 101

Page: 101 / 177

Press the topcase down until
it is seated flat on the topcase
carrier.

Push the topcase forward as
far as it will go, taking care not

to push the motorcycle forward
off its centre stand.

Push catch

up.

The catch engages with an
audible click.

Turn key

clockwise.

The topcase is locked.
Remove the key.

Adjustable topcase mount

The topcase mount can be in-
stalled on the luggage carrier or
instead of the rear seat.

The luggage carrier has two sets
of holes, one above the other, at
locations

. The topcase mount

can be tilted forward or back by
using holes at different heights
front and back. This enables the
topcase to be used as a backrest
in combination with the topcase

Accessories

Summary of Contents for R 1200 GS ADVENTURE


















































































































































































Search results

Summary of Contents for R 1200 GS ADVENTURE

Reviews:

Brands by name

Popular brands

BMW R 1200 GS ADVENTURE, Manual

Search results

Summary of Contents for R 1200 GS ADVENTURE

Reviews:

Brands by name

Popular brands