BMW R 1200 GS 2014, Rider'S Manual

Page: 68 / 197

DYNA
: When riding dynami-
cally on dry roads.
Enduro
: When driving off-
road.
Enduro PRO
: When riding
sporty off-road (with coding
plug installed only).
When the vehicle is stationary,
the selected riding mode is ac-
tivated after approx. 2 seconds.
The new riding mode is acti-
vated during operation under
the following conditions:
Throttle grip in neutral position
Clutch disengaged
After the new riding mode is
activated, the clock is displayed
again.
The configured riding mode
with the corresponding adapta-
tions of the engine character-
istics, ABS, ASC and dynamic
ESA is maintained, even after
the ignition is switched off.
Switching off TCP/RDC in
off-road mode
with Pro driving modes
OE
If you want to ride off-road with a
reduced tire inflation pressure, it
is possible to deactivate the TCP/
RDC warning for the Enduro and
Enduro Pro driving modes.
Condition: TCP/RDC is switched
on.
Switch on ignition ( 45).
Repeat pressing button 1
briefly, until in the top line of
the display
2
SETUP ENTER
is shown.
Press and hold button 1 to
start the
SETUP
menu.
Press button 1 briefly to re-
spectively select the
RDC
menu item.
The top line of the display
2
shows
RDC
.
The adjusted value appears
in the bottom line of the
display
3 .
Press button 4 briefly to
change the adjusted value.
The following settings are avail-
able:
ON
: The TCP/RDC display
warning symbol is shown in the
4
66
z Operation