BMW R 1200 GS 2014, Rider'S Manual

Page: 140 / 197

General instructions
BMW Motorrad cannot ex-
amine or test each product
of outside origin to ensure that it
can be used on or in connection
with BMW motorcycles without
constituting a safety hazard. Nor
is this guarantee provided when
the official approval of a specific
country has been granted. Tests
conducted by these instances
cannot make provision for all op-
erating conditions experienced by
BMW motorcycles and, conse-
quently, they are not sufficient in
some circumstances.
Use only parts and accessories
approved by BMW for your
motorcycle.
The safety, function and suitabil-
ity of the parts and accessory
products have been checked ex-
tensively by BMW. Therefore,
BMW assumes responsibility for
these products. BMW shall not
be liable for unapproved parts
and accessory products of any
kind.
Whenever you are planning mod-
ifications, comply with all the le-
gal requirements. The vehicle
must not infringe on national
road-vehicle construction and
use regulations of your country.
Your authorized BMW Motorrad
retailer offers you qualified advise
when choosing genuine BMW
parts, accessories and other
products.
You will find all BMW Motorrad
optional accessories on
our website:
"www.bmw-
motorrad.com" .
Onboard power sockets
Connection of electrical
devices
The ignition must be switched
on before electrical devices
connected to the power sock-
ets can be operated.
Cable routing
The cables from the onboard
sockets to the auxiliary devices
must be routed in such a way
that they do not impede the
rider.
Cable routing must not restrict
the steering angle and the han-
dling characteristics.
Cables must not be trapped.
Automatic deactivation
The onboard sockets are au-
tomatically switched off during
starting.
These sockets are switched
off approx. 15 minutes after
switching off the ignition to re-
duce the strain on the onboard
electrical system. Additional
devices with low power con-
sumption are possibly not de-
tected by the vehicle electron-
8
138
z Accessories