21
a
EN
There is a sticker on the inside of
the support feet that indicates the
appropriate installation site on the car.
The left support foot is preset and does
not need to be adjusted. The screws
have cover caps.
Place the installation tool (g) on the left
support foot (1) on the roof bar.
046 0854 V
1
g
The default adjustment is shown
on the front roof bar. Proceed in
exactly the same way to adjust the rear
roof bar.
Undo the Allen bolts (1) on the right-
hand side using the special wrench (c)
until the support foot (2) slides easily.
046 0855 V
1
c
2
Ensure that the support foot (1)
runs parallel to the metal edge (3)
in the gutter.
Place the roof bar with the support feet
(1) carefully into the roof bar recess (2)
in the gutter.
046 0856 V
1
2
3
!
Kap 0137514_01_ en_g.fm Seite 21 Mittwoch, 22. August 2001 2:06 14