20
n
After cleaning the gutter wait for
approximately five minutes before
you affix the gutter protector into the
gutter.
Ensure that you do not affix the gutter
protectors (j) and (k) into the sealing
area (1) for the threaded bush.
L
R
046 0836 V
k
j
1
Instructions for use:
The ideal
temperature for the work is 20°C.
If it is not possible to complete the work
in this temperature, we recommend
that you leave the roof bars on the roof
for 24 hours afterwards.
Slide the gutter protector (k) bearing the
letter L under the left connector (1) on
the gutter flap and affix the gutter
protector to the surface of the gutter so
that it covers the vertical metal edge.
Proceed in the same way with the right
gutter protector bearing the letter R.
1
k
L
039 0163 V
The special wrench has two
functions. When the handle (1) is
removed the angle wrench (2) is used
as an Allen key for tightening and
undoing the Allen bolts. The angle
wrench (2) must be connected to the
handle (1) (see arrows) to tighten the
coded screws.
To attach the wrench to the code screw
line up the arrows on the screw with
those on the special wrench (3).
046 0853 V
1
2
3
Kap 0137514_01_ en_g.fm Seite 20 Mittwoch, 22. August 2001 2:06 14