BMW M3 SEDAN 2017, Owner'S Manual

Page: 192 / 240

4. Turn the crank of the vehicle jack counter‐
clockwise to retract the vehicle jack and
lower the vehicle.
5. Remove the vehicle jack.
After the wheel change
1. Tighten the lug bolts crosswise. The tight‐
ening torque is 101 lb ft/140 Nm.
2. Stow the nonworking wheel in the cargo
area.
The nonworking wheel cannot be stored
under the cargo floor panel because of its
size.
3. Check tire inflation pressure at the next op‐
portunity and correct as needed.
4. Reset the Tire Pressure Monitor.
5. Check to make sure the lug bolts are tight
with a calibrated torque wrench.
6. Drive to the nearest dealer’s service center
or another qualified service center or repair
shop to have the damaged tire replaced.
Seite 192
Mobility Wheels and tires
192
Online Edition for Part no. 01 40 2 974 597 - VI/16