BMW K 1300 S Rider's, Rider'S Manual

Page: 95 / 147

Install securing screws 2 on left
and right with specified torque.
Front brake caliper on
wheel carrier
22 lb/ft (30 Nm)
The cable of the wheel
speed sensor could chafe
through if it comes into contact
with the brake disk.
Make sure that sensor cable is
routed correctly.
Snap the two retaining clips 1
for the sensor wire onto the
brake line.
Remove adhesive tape from
wheel rim.
Press handbrake lever firmly
a number of times until resis-
tance point is noticeable.
Install front wheel cover and fit
screws
1 on right and left.
Removing rear wheel
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing rear-wheel stand
(
98).
with center stand Generation
II
OA
Make sure ground is level and
firm and place motorcycle on
its center stand.
8
93
z Maintenance