BMW K 1200 S 2007, Rider'S Manual

Page: 77 / 165

an authorized BMW Motorrad
retailer.
Running in
The first 600 miles
(1,000 km)
While running in the motorcy-
cle, vary the throttle opening
and engine-speed range fre-
quently.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads, avoid-
ing high-speed main roads and
highways if possible.
Exceeding the specified en-
gine speeds while running
in will lead to increased engine
wear.
Adhere to the specified engine
run-in speeds.
Do not exceed the engine run-
in speeds.
Engine break-in speed
<7000 min
-1
Do not accelerate at full throt-
tle.
Avoid low engine speeds at full
load.
After 300 - 750 miles (500 -
1,200 km), have the first in-
spection performed.
Brake pads
New brake pads must "bed
down" and therefore do not
achieve their optimum friction
levels during the first 300 miles
(500 km). This initial reduction
in braking efficiency can be
compensated for by exerting
greater pressure on the levers.
New brake pads can ex-
tend stopping distance by a
significant margin.
Brake early.
Tires
New tires have a smooth sur-
face. This must be roughened by
riding in a restrained manner at
various heel angles until the tires
are run in. This running in proce-
dure is essential if the tires are to
achieve maximum grip.
New tires have not
achieved their full adhesion
yet. There is a danger of
accidents when driving at
extreme angles.
Avoid extreme angles.
Brakes
How is the shortest
braking distance
achieved?
The dynamic load distribution
between the front and rear wheel
changes during braking. The
heavier you brake, the more
the front wheel is loaded. The
5
75
z Riding
ProCarManuals.com