BMW K 1200 S 2007, Rider'S Manual

Page: 115 / 165

Rear-wheel stand
Use
In order to be able to work safe-
ly on motorcycles without cen-
ter stands, BMW Motorrad of-
fers a rear wheel stand. This rear
wheel stand with the BMW spe-
cial tool number 36 3 980 can
be obtained from your authorized
BMW Motorrad retailer.
Installing rear-wheel
stand
Set the desired height of the
rear wheel stand using the
bolts
1 .
Remove the lock washer 2 ; to
do so, press the unlock but-
ton
3 .
Push the rear wheel stand from
the left into the rear axle.
Apply the retaining disk from
the right; to do so, press the
unlock button.
Place your left hand on the
left grab handle of the motor-
cycle
4 and your right hand
on the lever of the rear wheel
stand
5 .
Raise motorcycle while simul-
taneously pressing lever down-
ward until motorcycle stands
vertically.
Press lever onto ground.
8
113
z Maint
e
nance
ProCarManuals.com