BMW G 650 GS Sertao Page 79 Rider'S Manual Download

Page: 79 / 133

Roll the front wheel forward to
remove.

Remove spacing bushings

from the wheel hub.

Threaded fasteners not
tightened to the specified

torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.

Slip spacing bushings

and

onto the wheel hub.

with BMW Motorrad ABS

When installing the front wheel,
take care not to damage the
ABS sensor and the ABS line.

The front wheel must be
installed right way round to

rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.

Roll the front wheel into posi-
tion between the forks, making

sure that the brake disc passes
between the brake pads.

Raise the front wheel, insert
axle

and tighten to specified

torque.

Quick-release axle in
telescopic forks

45 Nm

Remove the front-wheel stand.
Apply the front brake and firmly
compress the front forks sev-
eral times
Tighten axle clamping screw

to the specified torque.

Maintenance

ProCarManuals.com

Summary of Contents for G 650 GS Sertao






































































































































Search results

Summary of Contents for G 650 GS Sertao

Reviews:

Related manuals for G 650 GS Sertao

Brands by name

Popular brands

BMW G 650 GS Sertao, Rider'S Manual

Search results

Summary of Contents for G 650 GS Sertao

Reviews:

Related manuals for G 650 GS Sertao

Brands by name

Popular brands