BMW F 800 GT, Rider'S Manual

Page: 57 / 183

Activation with motion
sensor
The alarm function can be acti-
vated in 2 different ways:
Pressing the 1 button once
on the remote control. The
alarm function is enabled af-
ter 15 seconds. If switched
off more than one minute ago,
the
1 button must be pressed
for longer than one second.
Turning off the ignition (if pro-
grammed). The alarm function
is enabled after 45 seconds.
Activation is confirmed by two
flashes of the turn signals and
the sounding of two alarm tones.
Protection of the battery
in the control unit (DWA
disabled)
After approx. one hour in the
deactivated state, the DWA
switches off to protect the
battery. To activate the alarm
function after this period, the
ignition must be switched on and
then off again.
Motion sensor when
transporting the
motorcycle
If, for example, the motorcycle
is to be transported by train, it is
advisable to switch off the motion
sensor. The strong movements
could result in an accidental trig-
gering of the alarm.
Deactivating motion
sensor
Press button 1 of the remote
control again during the activa-
tion phase.
Turn indicators are illuminated
three times.
Alarm tone sounds three times.
Motion sensor is deactivated.
Alarm function
with anti-theft alarm system
(DWA)
OE
5
55
z Alarm system