BMW F 800 GT, Rider'S Manual

Page: 109 / 183

WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions in ABS operation
Please see the information on
the effect of wheel sizes on the
ABS system at the beginning
of this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Place rear wheel on rear wheel
support.
Tighten bolts 1 diagonally with
specified torque.
Rear wheel on drive
shaft
Tightening sequence: tighten
diagonally
44 lb/ft (60 Nm)
without center stand
OE
Remove auxiliary stand.
Light sources
Replacing low and/or
high-beam light sources
in headlight
Park motorcycle, ensuring that
support surface is firm and
level.
Turn off ignition.
Remove cover 1 for high-beam
headlight or cover 2 for low-
beam headlight by pulling on
lever
3 .
9
107
z Maintenance