BMW F 700 GS 2012 Rider'S Manual Download

Page: 96 / 162

Use a dry cloth to wipe gauge
length

clean

Seat the oil dipstick on the oil
filler neck, but do not engage
the threads.
Remove the oil dipstick and
check the oil level.

Engine oil, specified level

Between MIN and MAX
marks

If the oil level is below the MIN
mark:

Top up the engine oil (

94).

If the oil level is above the MAX
mark:

Have the oil level corrected
by a specialist workshop,
preferably an authorised BMW
Motorrad dealer.

Install the oil dipstick.

Top up the engine oil

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Wipe the area around the filler
neck clean.

Remove oil dipstick

Damage to the engine
can result if it is operated

without enough oil, but the same
also applies if the oil level is too
high.
Always make sure that the oil
level is correct.

Maintenance

ProCarManuals.com

Summary of Contents for F 700 GS 2012



































































































































































Search results

Summary of Contents for F 700 GS 2012

Reviews:

Related manuals for F 700 GS 2012

Brands by name

Popular brands

BMW F 700 GS 2012, Rider'S Manual

Search results

Summary of Contents for F 700 GS 2012

Reviews:

Related manuals for F 700 GS 2012

Brands by name

Popular brands