BMW F 700 GS 2012 Page 82 Rider'S Manual Download

Page: 82 / 162

Press button

to switch on

the auxiliary headlights.

The telltale light for the
auxiliary headlights is on.

If the auxiliary headlights were
turned on before the motor
was switched off, they will be
automatically switched back off.
Press button

again to switch

off the auxiliary headlights.

Cases

with case

Opening cases

Turn key

in the case lock to

right angles with the forward
direction of travel.
Keep the yellow latch

held

and fold out the carry handle

Push yellow button

down

and at the same time open the
lid of the case.

Closing cases

Turn the lock with the key until
it is at right angles to the for-
ward direction of travel.
Close the case lid.
The lid engages with an aud-
ible click.

Accessories

ProCarManuals.com

Summary of Contents for F 700 GS 2012



































































































































































Search results

Summary of Contents for F 700 GS 2012

Reviews:

Related manuals for F 700 GS 2012

Brands by name

Popular brands

BMW F 700 GS 2012, Rider'S Manual

Search results

Summary of Contents for F 700 GS 2012

Reviews:

Related manuals for F 700 GS 2012

Brands by name

Popular brands