BMW C 650 GT Rider'S Manual Download Page 103

Page: 103 / 194

Seat the oil dipstick on the oil
filler neck, but do not engage
the threads.
Remove the oil dipstick and
check the oil level.

Engine oil, specified level

Between MIN and MAX marks
(Engine at operating tempe-
rature, insert oil dipstick un-
til resting on edge of oil filler
neck,

do not engage the

threads

If the oil level is below the min-
imum mark:

Top up the engine oil to the
specified level.

Engine oil, quantity for
topping up

max 0.5 l (Difference between
MIN and MAX)

If the oil level is above the MAX
mark:

Have the oil level corrected
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.

Install the oil dipstick.

Install cover

Insert footboard support

101

Maintenance

https://www.motorcycle-manual.com/

Summary of Contents for C 650 GT



































































































































































































Search results

Summary of Contents for C 650 GT

Reviews:

Related manuals for C 650 GT

Brands by name

Popular brands

BMW C 650 GT, Rider'S Manual

Search results

Summary of Contents for C 650 GT

Reviews:

Related manuals for C 650 GT

Brands by name

Popular brands