manualshive.com logo in svg

BMW BMW M2 COMPETITION, Owner'S Manual

The BMW M2 Competition is a thrilling sports car, and you can get the most out of its performance by referring to the comprehensive Owner's Manual. Unlock the full potential of your BMW with this essential manual, available for free download at manualshive.com. Enhance your driving experience with the ultimate guide.

Share
Download
background image

Switching on

With radio-ready state switched off, press the
lever either up or down past the resistance point.

Switching off

Press the lever back into the standard position.

Welcome lights and

headlight courtesy delay

feature

Welcome lights

General information

Depending on the vehicle equipment and the
ambient brightness, individual light functions may
be switched on briefly when the vehicle is un‐
locked.

Activating/deactivating

Position of switch:  

  ,    

Via iDrive:

1.

"My Vehicle"

2.

"Vehicle settings"

3.

"Lighting"

4.

"Exterior lighting"

5.

"Welcome lights"

The setting is stored for the driver profile cur‐
rently used.

Headlight courtesy delay feature

General information

The low beams stay illuminated for a particular
time if the high beams are switched on after
radio-ready state is switched off.

Setting the duration

Via iDrive:

1.

"My Vehicle"

2.

"Vehicle settings"

3.

"Lighting"

4.

"Exterior lighting"

5.

"Pathway lighting"

6.

Set length of time.

The setting is stored for the driver profile cur‐
rently used.

Automatic headlight

control

Concept

The low beams are switched on and off automat‐
ically depending on the ambient brightness, for
example in tunnels, in twilight or if there is pre‐
cipitation.

General information

A blue sky with the sun low on the horizon can
cause the lights to be switched on.
When emerging from a tunnel during the day, the
low beams are not switched off immediately but
instead only after approx. 2 minutes.

Activating

Position of switch:    
The indicator light in the instrument cluster is il‐
luminated when the low beams are switched on.

Seite 134

CONTROLS

Lights

134

Online Edition for Part no. 01402720665 - II/19

Summary of Contents for BMW M2 COMPETITION























































































































































































































































































Reviews:

No comments

Related manuals for BMW M2 COMPETITION

Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
iDataLink maestro Rr Install Manual preview
maestro Rr
Brand: iDataLink Pages: 106
Vaisala MD30 Setup Manual preview
MD30
Brand: Vaisala Pages: 24
Axxess AX-DSPX-HYKIA2 Installation Instructions preview
AX-DSPX-HYKIA2
Brand: Axxess Pages: 4
Vintage Air 473275 Manual preview
473275
Brand: Vintage Air Pages: 14
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
Fiat Fiat Bravo LPG Owner'S Manual preview
Fiat Bravo LPG
Brand: Fiat Pages: 24
Valeo AS1A Owner'S Manual preview
AS1A
Brand: Valeo Pages: 28
Hama 00 123530 Operating Instructions preview
00 123530
Brand: Hama Pages: 4
Volvo 1992 850 Service And Repair Manual preview
1992 850
Brand: Volvo Pages: 230
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
Safe Fleet PRIME DESIGN HRR-369-E-UM3-96 Manual preview
PRIME DESIGN HRR-369-E-UM3-96
Brand: Safe Fleet Pages: 12
Kocchi's 772161M1 Manual preview
772161M1
Brand: Kocchi's Pages: 4
Honda 1991 Civic Online Reference Owner'S Manual preview
1991 Civic
Brand: Honda Pages: 124
Subaru 2003 Baja Owner'S Manual preview
2003 Baja
Brand: Subaru Pages: 32
Black+Decker BXAE00011 Operating Instructions Manual preview
BXAE00011
Brand: Black+Decker Pages: 21
Beeper RW050RF User& Installer'S Manual preview
RW050RF
Brand: Beeper Pages: 20
Gator GT700SD User Manual preview
GT700SD
Brand: Gator Pages: 6

Brands by name

Popular brands

Load more brands