manualshive.com logo in svg

BMW BMW M2 COMPETITION, Owner'S Manual

Share
Download
BMW BMW M2 COMPETITION Owner'S Manual Download Page 28

Manual transmission

Shifting

When shifting to a lower gear, excessive speeds
can damage the engine. There is a risk of dam‐
age to property. When shifting into 5th or 6th
gear, press the gearshift lever to the right.

Reverse gear

Select only when the vehicle is stationary.
To overcome the resistance push the gearshift
lever dynamically to the left and engage reverse
gear with a forward shifting movement.

M double-clutch transmission

Engaging selector lever positions

Press on the brake pedal and pull or push the se‐
lector lever in the corresponding direction.

▷

R: reverse gear.

▷

N: neutral.

▷

  Center position, forward position.

▷

+: manual upshifting.

▷

-: manual downshifting.

▷

D/S: switch between drive mode and sequen‐
tial mode.

D is Drive mode

In Drive mode, all forward gears are automatically
changed.

S is Sequential mode

Use the shift paddles or the selector lever to up‐
shift or downshift without letting off the gas.

R is reverse

Select only when the vehicle is stationary.

N is Neutral

Use in automatic vehicle washes, for instance.
The vehicle can then roll.

P Park

The drive wheels are blocked.
P is engaged automatically:

▷

After the engine is switched off, if the vehicle
is in radio-ready state or if the ignition is
switched off and if position R or D is set.

▷

With the ignition is off, if position N is set.

High beams, headlight flasher,

turn signal, roadside parking

light

High beams, headlight flasher

Push the lever forward or pull it backward.

▷

High beams on, arrow 1.
The high beams light up when the low beams
are switched on.

▷

High beams off/headlight flasher, arrow 2.

Seite 28

QUICK REFERENCE

On the road

28

Online Edition for Part no. 01402720665 - II/19

Summary of Contents for BMW M2 COMPETITION























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands