manualshive.com logo in svg

BMW BMW M2 COMPETITION, Owner'S Manual

Share
Download
BMW BMW M2 COMPETITION Owner'S Manual Download Page 187

The cigarette lighter is located between the cup
holders.

Push in the cigarette lighter.
The cigarette lighter can be re‐
moved as soon as it pops back
out.

Sockets

General information

The lighter socket can be used as a socket for
electrical equipment while the engine is running
or when the ignition is switched on.
The total load of all sockets must not exceed
140 watts at 12 volts.
Do not damage the socket by using non-com‐
patible connectors.

Safety information

Warning

Devices and cables in the unfolding area of the
airbags, such as portable navigation devices,
can hinder the unfolding of the airbag or be
thrown around in the car's interior during un‐
folding. There is a risk of injury. Make sure that
devices and cables are not in the airbag's area
of unfolding.

NOTICE

Battery chargers for the vehicle battery can
work with high voltages and currents, which
means that the 12 volt on-board network can
be overloaded or damaged. There is a risk of
damage to property. Only connect battery
chargers for the vehicle battery to the starting
aid terminals in the engine compartment.

NOTICE

If metal objects fall into the socket, they can
cause a short circuit. There is a risk of damage
to property. Replace the cigarette lighter or
socket cover again after using the socket.

Front center console

Slide the cover forward.

Remove the socket or cigarette lighter cover.

Seite 187

Interior equipment

CONTROLS

187

Online Edition for Part no. 01402720665 - II/19

Summary of Contents for BMW M2 COMPETITION























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands