Retrofit / Installation kit No. 84 64 0 025 810, 84 64 0 026 614 Issue date: 07.2000
Installation instructions No. 01 29 0 025 833
Clean (degrease) the hands-free facility
control module (2) before affixing the Dual
securing strips.
Cut the 300 mm length of fine Dual securing
strip (18) into two lengths of 100 mm (the rest is
not required).
Affix the two cut lengths of fine Dual securing
strip (18) (100 mm) on to the hands-free facility
control module (2) as shown in the figure.
12. To connect and install the hands-free facility control module
18
2
F 38 0193 B
18
17
2
F 38 0194 B
Cut the 300 mm length of coarse Dual securing
strip (17) into two lengths of 100 mm (the rest is
not required).
Press the two cut lengths of coarse Dual
securing strip (17) on to the two lengths of fine
Dual securing strip (18) affixed to the hands-free
facility control module (2).
GB/41
Connect branch
C1
, transparent 15-pin plug
casing, Western plug, on the mobile phone
holder with connection cable to the grey 15-pin
socket casing (30) on the hands-free facility
control module (2).
Connect branch
A3
, 2-pin pawl plug with a
diameter of 2.5 mm on the adapter wiring
harness
A
, to the grey socket casing with a
diameter of 2.5 mm (31) on the hands-free facility
control module (2).
Connect branch
A4
, 2-pin pawl plug with a
diameter of Ø 3.5 mm on the adapter wiring
harness
A
, to the grey socket casing with a
diameter of Ø 3.5 mm (32) on the hands-free
facility control module (2).
Connect branch
A5
, white 6-pin socket casing
on the adapter wiring harness
A
, to the white
6-pin plug socket casing (33) on the hands-free
facility control module (2).
Then press the cover cap for the hands-free
facility control module (5) on to the hands-free
facility control module (2) and remove the
backing foil (34) from the coarse Dual securing
strip (17) on the hands-free facility control
module (2).
F 38 0195 B
C
A
34
2
A3
17
5
A5
31
32
30
33
2
C1
A4
