© BMW AG, Munich
01 29 0 420 167
12/2007
(Z/Z)
2
Pictograms
Denotes instructions that draw your attention to dangers.
Denotes instructions that draw your attention to special features.
!
Denotes the end of the instruction or other text.
Information for the customer
Print out the “Customer Information” section at the end of these installation instructions and give it to the customer.
Installation information
Attention must be paid to connection differences between equipment with
M-ASK
,
CCC
or
CHAMP
.
For cars
built after 03/07 without SA866
(China language version),
SA867
(Korea language version)
or LA807
(Japan national version)
except E81
,
E82, E87
and cars
with CHAMP
, the grey cable must be disconnected,
insulated and tied back from PIN 1 on branch
A1
.
For cars
with CHAMP
the grey cable must be disconnected from PIN 12 and connected to PIN 25 at branch
A15
,
26-pin BL socket casing.
In countries in which the picture playback is permitted up to a certain speed, the red cable from PIN 2 to branch
A1
must be disconnected, insulated and tied back.
Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs incurred as a
result of this will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
All pictures show LHD cars; proceed accordingly on RHD cars.
In most cases, after installation of the retrofit, repairs or a software update of the car, an image mis-
alignment appears on the control display. To correct the image misalignment, ACM Unit C must be
installed (see Section “Concluding work”).
For cars without auxiliary socket, the retrofit must be programmed/coded using SSS (Software Service Station) via
the
CIP
,
AUX IN connection retrofit
path after the installation.
List of special equipment
The following special equipment must be taken into consideration when installing the retrofit kit:
SA 6FL
USB/audio interface
Special tools required
00 9 317 Trim wedge
!
