EN/14
Retrofit/Installation kit No. 65 90 0 028 873 84 64 25,805 (others see cover sheet)
Installation Instructions no. 01 29 0 029 541 01 29 0 029 544
Issue date: 04.2001
9.
To install the basic wiring harness A (E39 cars only)
0
The figure shows the installation space near
the handbrake lever.
"
Carefully cut out the opening (20) in the carpet (21)
in front of the handbrake lever (22).
Pull up the carpet at the rear (21) on the driver’s
side and lay branches
A1
to
A4
and
A14
on the
basic wiring harness
A
forwards to the gearshift
lever under the centre console.
0
Lay branch
A1
, coaxial socket casing FME on the
basic wiring harness
A
under the centre console
(20) into the passenger’s footwell.
Lay branch
A4
, black 18-pin socket casing on the
basic wiring harness
A
, as shown in the figure,
under the centre console oddments box at the
front.
Connect branch
A4
to the required adapter
cable for the hands-free kit.
"
0
In cars with an on-board monitor radio,
insulate and tie back branches
A2
,
A3
and
A14
.
"
Lay branch
A2
, black 12-pin plug casing, branch
A3
, socket contact, white/brown cable, and
branch
A14
, socket contact, white/green cable, on
the basic wiring harness
A
to the installation site of
the radio.
0
Cars without an on-board monitor radio only
Disconnect the black 12-pin plug casing
X13598
from the radio connection plug (20) and tie it back.
Connect branch
A2
, black 12-pin plug casing, to
the cleared slot (21) in the radio connection plug
(20).
If the car does
not
have a black 12-pin plug
casing
X13598
, branch
A2
must be
connected direct.
"
21
22
F 39 0971 B
A1-A4+A14
21
20
A
A1
20
A4
A
F 39 0972 B
20
A3
A2
A
A14
F 39 0976 B
20
21
20
A2
A2
X13598
F 39 0973 B
