BMW 318D, Owner'S Handbook Manual

Page: 122 / 430

1. Push the head restraint up until resistance is
felt.
2. Press the button, arrow 1, and pull the head
restraint fully out.
Removing: M sport seat
The head restraints cannot be removed.
Installing
Proceed in the reverse order to install the head
restraint.
Rear head restraints
Safety notes
WARNING
If the head restraints are removed or incorrectly
adjusted, they cannot provide protection as in‐
tended and head and neck injuries may result.
There is a danger of injury.
▷ Before a journey, re-install any removed
head restraints on all occupied seats.
▷ Adjust the head restraint so that its centre
supports the back of the head at eye level
where possible.
▷ Adjust the distance so that the head re‐
straint is as close as possible to the back
of the head. If necessary, adjust the dis‐
tance by adjusting the backrest angle.
WARNING
Parts of the body can become trapped when
the head restraints are moved. There is a dan‐
ger of injury. When moving the head restraint,
make sure that the area of movement is kept
clear.
WARNING
Objects on the head restraint reduce the pro‐
tective effect in the head and neck area. There
is a danger of injury.
▷ Do not fit any covers on the seats or head
restraints.
▷ Do not hang objects such as coat hangers
directly on the head restraint.
▷ Only use accessories that have been clas‐
sified as safe for attaching to the head re‐
straint.
▷ Do not use any accessories, for example
cushions, during the journey.
Folding down the head restraints
Head restraints can be folded back to improve
rear visibility. Only fold back the head restraint if
no one is sitting on the seat in question.
▷ Backward: press the button, arrow 1, and fold
back the head restraint.
▷ Forwards: fold the head restraint forwards as
far as it will go. Ensure that the head restraint
engages correctly.
Seite 122
CONTROLS
Seats, mirrors and steering wheel
122
Online Edition for Part no. xxx - VI/19