manualshive.com logo in svg

BMW 2016 M4 Coupe, Owner'S Manual, Page: 148 / 228

Share
Download
BMW 2016 M4 Coupe Owner'S Manual Download Page 148

Note

The total load of all sockets must not exceed
140 watts at 12 volts.
Do not damage the socket by using unsuitable
connectors.

Front center console

Raise the lid and remove the cover or cigarette
lighter.

Rear center console

Remove the cover.

In the trunk

The socket is located on the left side in the
trunk.

USB interface for data

transfer

The concept

Connection for importing and exporting data
on USB devices, e.g.:

▷

Personal Profile settings, refer to page 

35

.

▷

Music collection.

▷

Importing Trips.

Hints

Observe the following when connecting:

▷

Do not use force when plugging the con‐
nector into the USB interface.

▷

Do not connect devices such as fans or
lights to the USB interface.

▷

Do not connect USB hard drives.

▷

Do not use the USB interface for recharg‐
ing external devices.

Seite 144

Controls

Interior equipment

144

Online Edition for Part no. 01 40 2 960 786 - II/15

Summary of Contents for 2016 M4 Coupe





































































































































































































































Reviews:

No comments