manualshive.com logo in svg

BMW 2016 M4 Coupe, Owner'S Manual

The BMW 2016 M4 Coupe Owner's Manual is a comprehensive guide designed to assist owners in understanding and operating their high-performance vehicle. This manual covers every aspect of the M4 Coupe, providing detailed instructions and useful tips. Download your free manual from manualshive.com, ensuring a smooth driving experience from day one.

Share
Download
background image

Interior equipment

Vehicle features and options

This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.

Universal Integrated Remote

Control

The concept

The universal garage door opener can operate
up to 3 functions of remote-controlled sys‐
tems such as garage door drives or lighting
systems. The universal garage door opener re‐
places up to 3 different hand-held transmitters.
To operate the remote control, the buttons on
the interior rearview mirror must be program‐
med with the desired functions. The hand-held
transmitter for the particular system is required
in order to program the remote control.

During programming
During programming and before activat‐

ing a device using the universal garage door
opener, ensure that there are no people, ani‐
mals or objects in the area of the remote-con‐
trolled device; otherwise, there is a risk of in‐
jury or damage.
Also follow the safety instructions of the hand-
held transmitter.◀

Before selling the vehicle, delete the stored
functions for the sake of security.

Compatibility

If this symbol is printed on the packag‐
ing or in the instructions of the system
to be controlled, the system is gener‐

ally compatible with the universal garage door
opener.
If you have any questions, please contact:

▷

Your service center.

▷

www.homelink.com on the Internet.

HomeLink is a registered trademark of Gentex
Corporation.

Control elements on the interior

rearview mirror

▷

LED, arrow 1.

▷

Buttons, arrow 2.

▷

The hand-held transmitter, arrow 3, is re‐
quired for programming.

Programming

General information

1.

Switch on the ignition.

2.

Initial setup:
Press and hold the left and right button on
the interior rearview mirror simultaneously
for approximately 20 seconds until the LED
on the interior rearview mirror flashes. This

Seite 139

Interior equipment

Controls

139

Online Edition for Part no. 01 40 2 960 786 - II/15

Summary of Contents for 2016 M4 Coupe





































































































































































































































Reviews:

No comments

Related manuals for 2016 M4 Coupe

Uebler F42 Mounting And Operating Instructions preview
F42
Brand: Uebler Pages: 18
Roadmaster Sterling ALL-TERRAIN 576 Owner'S Manual & Installation Instructions preview
Sterling ALL-TERRAIN 576
Brand: Roadmaster Pages: 12
Thule Kit 2161 Fitting Instructions preview
Kit 2161
Brand: Thule Pages: 2
ideus VV950 User Manual preview
VV950
Brand: ideus Pages: 159
Chevrolet Impala Limited 2014 Owner'S Manual preview
Impala Limited 2014
Brand: Chevrolet Pages: 356
ACV 281178-28G-M Installation Manual preview
281178-28G-M
Brand: ACV Pages: 2
Abrams RE-47X Installation And Operation Manual preview
RE-47X
Brand: Abrams Pages: 12
Roadmaster 195125 Assembly And Operating Instructions preview
195125
Brand: Roadmaster Pages: 4
EUFAB 11512 Manual preview
11512
Brand: EUFAB Pages: 4
Belkin TuneBase F8Z442 User Manual preview
TuneBase F8Z442
Brand: Belkin Pages: 162
Mazda MX-3 1995 Workshop Manual preview
MX-3 1995
Brand: Mazda Pages: 1001
Ford 2003 Mustang Workshop Manual preview
2003 Mustang
Brand: Ford Pages: 4378
Toyota 2013 Prius c Owner'S Manual preview
2013 Prius c
Brand: Toyota Pages: 549
Volvo 2009 S40 Owner'S Manual preview
2009 S40
Brand: Volvo Pages: 286
Tuff Tonneaus Bunji Ute Installation Instructions preview
Bunji Ute
Brand: Tuff Tonneaus Pages: 4
LetsGoAero V2 Two-Bike Carrier User Manual preview
V2 Two-Bike Carrier
Brand: LetsGoAero Pages: 2
GAC MOTOR GAC7130H2A5 User Manual preview
GAC7130H2A5
Brand: GAC MOTOR Pages: 356
NavInc USB-PEU-RD4 User Manual preview
USB-PEU-RD4
Brand: NavInc Pages: 5

Brands by name

Popular brands

Load more brands