BMW 2013 S 1000R Rider'S Manual Download

Page: 121 / 190

Use basic stand with mount-
ing pieces. The basic stand
and its accessories are avail-
able through your authorized
BMW Motorrad retailer.

Insert mounting pins

at left

and right in front suspension.

Turn in the bracket

with the

long sides facing the inside.
Adjust the mounting pieces

to the width of the pins in-

serted into the front suspen-
sion.
Adjust height of front wheel
stand until front wheel can be
turned freely.

Attach the front wheel stand to
the front suspension and press
it on the ground evenly.

Engine oil

Checking engine oil level

The oil level varies with
the temperature of the

oil. The higher the temperature,
the higher the level of oil in the

119

Maintenance

Summary of Contents for 2013 S 1000R































































































































































































Search results

Summary of Contents for 2013 S 1000R

Reviews:

Related manuals for 2013 S 1000R

Brands by name

Popular brands

BMW 2013 S 1000R, Rider'S Manual

Search results

Summary of Contents for 2013 S 1000R

Reviews:

Related manuals for 2013 S 1000R

Brands by name

Popular brands