BMW 2012 MINI COUNTRYMAN Owner'S Manual Download Page 81

Page: 81 / 201

CONTROLS

Lamps

Switching interior lamps on/off manually

To switch the interior lamps on/off.
Press the switch.
To switch off the interior lamps permanently,
press the switch for about 3 seconds.

Reading lamps

Reading lamps are provided in the front and rear
adjacent to the interior lamps.

To switch the reading lamps on and off.
In the front: press the switch.
In the rear: press the button.

Ambient lighting

The color and brightness of the ambient lighting
can be changed.

Press the switch forward.
The color changes in stages.

Press the switch toward the rear.
The brightness changes in stages.

Intermediate settings and colors are possible.

For a continuous color change in the
ambient lighting, press and hold the

switch forward for longer than 10 seconds.

Online Edition for Part no. 01 40 2 914 828 - © 07/12 BMW AG

Summary of Contents for 2012 MINI COUNTRYMAN










































































































































































































Search results

Summary of Contents for 2012 MINI COUNTRYMAN

Reviews:

Related manuals for 2012 MINI COUNTRYMAN

Brands by name

Popular brands

BMW 2012 MINI COUNTRYMAN, Owner'S Manual

Search results

Summary of Contents for 2012 MINI COUNTRYMAN

Reviews:

Related manuals for 2012 MINI COUNTRYMAN

Brands by name

Popular brands