BMW 2012 MINI COUNTRYMAN Owner'S Manual Download Page 76

Page: 76 / 201

Technology for driving comfort and safety

CONTROLS

Operational readiness of airbag system

As of radio readiness, page

, the warning

lamp lights up briefly to indicate that the entire
airbag system and the belt tensioners are oper-
ational.

Airbag system malfunction

The warning lamp does not come on when
radio readiness is switched on.

The warning lamp stays lit continuously.

In the event of a fault in the airbag system,
have it checked without delay; otherwise,

there is the risk that the system will not function
as intended even if a severe accident occurs.

Online Edition for Part no. 01 40 2 914 828 - © 07/12 BMW AG

Summary of Contents for 2012 MINI COUNTRYMAN










































































































































































































Search results

Summary of Contents for 2012 MINI COUNTRYMAN

Reviews:

Related manuals for 2012 MINI COUNTRYMAN

Brands by name

Popular brands

BMW 2012 MINI COUNTRYMAN, Owner'S Manual

Search results

Summary of Contents for 2012 MINI COUNTRYMAN

Reviews:

Related manuals for 2012 MINI COUNTRYMAN

Brands by name

Popular brands