BMW 2011 R 1200 GS Page 114 Rider'S Manual Download

Page: 114 / 167

Slacken adjusting screws

Push the two adapters

apart

until the front forks fit between
them.
Use locating pins

to set the

front-wheel stand to the de-
sired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.

Align the two adapters

that the front forks are securely
seated.
Tighten adjusting screws

If the motorcycle is on the
centre stand and is raised

too far, the centre stand will lift
clear of the ground and the mo-
torcycle could topple to one side.
When raising the motorcycle,
make sure that the centre stand
remains on the ground.

Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.

112

Maintenance

ProCarManuals.com

Summary of Contents for 2011 R 1200 GS








































































































































































Search results

Summary of Contents for 2011 R 1200 GS

Reviews:

Related manuals for 2011 R 1200 GS

Brands by name

Popular brands

BMW 2011 R 1200 GS, Rider'S Manual

Search results

Summary of Contents for 2011 R 1200 GS

Reviews:

Related manuals for 2011 R 1200 GS

Brands by name

Popular brands