BMW 2007 M6 Owner'S Manual Download Page 103

Page: 103 / 270

101

Change to upper field if necessary. Turn the
controller until "Lighting" is selected and
press the controller.

Select "High-beam assistant" and press
the controller.

High-beam assistant is switched off.

The setting is stored for the remote control cur-
rently in use.

Instrument lighting

The lighting intensity can be adjusted with the
knurled wheel with the parking lamps/low
beams switched on.

Interior lamps

Control of the interior lamps, footwell lamps,
door entry lighting, courtesy lamps

and sill

panel lighting

is automatic.

With the courtesy lamps,

LED lights are pro-

vided in the outside rearview mirrors to illumi-
nate the exterior area around the doors.

To protect the battery, all lamps in the
vehicle are switched off approx. 15 min-

utes after radio readiness is switched off, refer
to Start/Stop button on page

Switching interior lamps on and off

manually

Press button

If the interior lamps, footwell lamps, door entry
lighting, courtesy lamps and sill panel lighting
are to remain switched off continually, press the
button for approx. 3 seconds.

Reading lamps

The reading lamps are beside the interior lamp:
You can turn them on and off using buttons

located next to the lamps.

Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG

Summary of Contents for 2007 M6















































































































































































































































































Search results

Summary of Contents for 2007 M6

Reviews:

Related manuals for 2007 M6

Brands by name

Popular brands

BMW 2007 M6, Owner'S Manual

Search results

Summary of Contents for 2007 M6

Reviews:

Related manuals for 2007 M6

Brands by name

Popular brands