manualshive.com logo in svg

BMW 1 SERIES 2013, Owner'S Manual, Page: 72 / 217

Share
Download
BMW 1 SERIES 2013 Owner'S Manual Download Page 72

71

Controls overview

Controls

To start the of the consumption calculation:

1.

 Press the button.

2.

 Press the button.

The previous display is set to zero and the 
system begins to recalculate the average 
fuel consumption.

Average speed

An average speed driven can be displayed.
The average speed is calculated for the time 
during which the engine has been running.

To start the calculation of the average speed:

1.

 Press the button.

2.

 Press the button.

The previous display is set to zero and the 
system begins to recalculate the average 
speed.

Cruising range

"RANGE"
The display shows the estimated distance that 
can still be driven with the existing fuel quantity, 
taking into account the prior average fuel con-
sumption.

Settings and information

Operating principle

Certain settings and information can only be 
made or called up when the ignition is switched 
on. A number of settings cannot be made while 
driving.

1

Button for:

>

Selecting display

>

Setting values

Online Edition for Part no. 01402911200 - © 06/13 BMW AG

Summary of Contents for 1 SERIES 2013


























































































































































































































Reviews:

No comments