manualshive.com logo in svg

BMW 1 SERIES 2013, Owner'S Manual

The BMW 1 Series 2013 Owner's Manual is an essential guide for every proud owner. This comprehensive manual is now available for free download at manualshive.com, providing users with detailed instructions, tips, and maintenance information. Enhance your driving experience and unlock the full potential of your BMW 1 Series 2013 with this downloadable manual.

Share
Download
background image

146

Communications

Telephone

Inserting/removing snap-in adapter

1.

Press button

1

 and remove the cover.

2.

Insert the snap-in adapter at the front, 
arrow

1

, and press downward, arrow

2

, until 

it clicks into place.

3.

To remove the snap-in adapter, press the 
button

1

.

Inserting/removing mobile phone

1.

Depending on the mobile phone, remove 
the protective cap from the mobile phone's 
antenna connector so that the mobile 
phone can engage in the snap-in adapter.

2.

Push the mobile phone with the buttons 
facing upward toward the electrical connec-
tions and press down until it engages.

With the vehicle in radio readiness and above, 
the battery is charged, refer to charging symbol 
on the mobile phone.
To remove the mobile phone:
Press the button.

Online Edition for Part no. 01402911200 - © 06/13 BMW AG

Summary of Contents for 1 SERIES 2013


























































































































































































































Reviews:

No comments

Related manuals for 1 SERIES 2013

ULTIMATE SPEED CARBON Assembly And Safety Advice preview
CARBON
Brand: ULTIMATE SPEED Pages: 19
Yakima KingJoe 2 Quick Start Manual preview
KingJoe 2
Brand: Yakima Pages: 7
Yakima BowDown Quick Start Manual preview
BowDown
Brand: Yakima Pages: 6
Yakima LOCKN'LOAD Manual preview
LOCKN'LOAD
Brand: Yakima Pages: 10
Yakima HitchSki Quick Start Manual preview
HitchSki
Brand: Yakima Pages: 12
Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
Kia 2016 Cadenza Owner'S Manual preview
2016 Cadenza
Brand: Kia Pages: 419
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
GMC YUKON 2018 Owner'S Manual preview
YUKON 2018
Brand: GMC Pages: 425
U.S. General 95904 Operating Instructions preview
95904
Brand: U.S. General Pages: 4
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
Black+Decker BXAE00011 Operating Instructions Manual preview
BXAE00011
Brand: Black+Decker Pages: 21
Beeper RW050RF User& Installer'S Manual preview
RW050RF
Brand: Beeper Pages: 20
Z Flash OBD-II STALK User Manual preview
OBD-II STALK
Brand: Z Flash Pages: 4
PEUGEOT 5008 2017 Handbook preview
5008 2017
Brand: PEUGEOT Pages: 404
Honda 08P00-T7S-600 Installation Instructions preview
08P00-T7S-600
Brand: Honda Pages: 5
Valeo MBHL Operating Manual preview
MBHL
Brand: Valeo Pages: 29

Brands by name

Popular brands

Load more brands