BMW Motorrad S 1000XR 2020, Rider'S Manual

Page: 82 / 259

with Keyless Ride OE
A triggered alarm signal can be
canceled at any time by pressing
the button
1 of the radio-oper-
ated key without deactivating the
DWA.
If an alarm was activated while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched on.
The DWA LED then indicates
the reason for the alarm for one
minute.
Light signals on DWA LED:
1 flash: motion sensor 1
2 flashes: motion sensor 2
3 flashes: ignition turned on
with unauthorized ignition key
4 flashes: anti-theft alarm sys-
tem disconnected from vehicle
battery
5 flashes: motion sensor 3
Deactivating DWA
Switch on the ignition.
Turn indicators are illuminated
once.
Confirmation tone sounds once
(if programmed).
DWA is now switched off.
Adjust DWA
Switching on ignition ( 58).
Call up menu
Settings
,
Ve-
hicle settings
,
Alarm
system
.
The following adjustments are
available:
Adjust
Warning signal
Turn
Tilt sensor
on and off
Turn
Arming tone
on and off
Turn
Arm automatically
on
and off
Adjustment options
Warning signal
: Set rising
and falling or intermittent alarm
tone.
Tilt sensor
: Activate the tilt
alarm sensor to monitor the tilt of
the vehicle. The anti-theft alarm
system responds if, for example,
if the wheel is stolen or the mo-
torcycle is towed.
NOTICE
Deactivate the tilt sensor when
transporting the vehicle to avoid
triggering the DWA.
Arming tone
: Confirmation
alarm tone after activating/de-
activating the DWA in addition to
flashing turn indicators.
4
80
z Operation