BMW Motorrad S 1000XR 2020 Rider'S Manual Download Page 60

Page: 60 / 259

Ignition steering lock

Ignition key

You are provided with 2 ignition
keys.
Should you lose your keys, refer
to the notes regarding the elec-
tronic immobilizer (EWS) (

59).

A single key fits the ignition
switch / steering lock, the fuel
filler cap and the seat lock.

Securing steering lock

Turn handlebars to left.

Turn the ignition key to posi-
tion

while moving the handle-

bars somewhat.
Ignition, lights and all electrical
circuits switched off.
Steering lock locked.
The ignition key can now be
removed.

Switching on ignition

Turn ignition key to position

Parking lights and all function
circuits switched on.
Engine can be started.
Pre-Ride-Check is carried out.
(

117)

ABS self-diagnosis is
performed. (

117)

DTC self-diagnosis is per-
formed. (

119)

Operation

Summary of Contents for S 1000XR 2020




































































































































































































































































Search results

Summary of Contents for S 1000XR 2020

Reviews:

BMW Motorrad S 1000XR 2020, Rider'S Manual, Page: 60 / 259

Search results

Summary of Contents for S 1000XR 2020

Reviews: