BMW Motorrad R 1200R 2014, Rider'S Manual

Page: 95 / 231

ASC/DTC self-
diagnosis
The BMW Motorrad ASC/DTC
performs self-diagnosis to ensure
its operability. Self-diagnosis is
performed automatically when
you switch on the ignition.
Phase 1
Test of the diagnosable system
components with the vehicle at
a standstill.
slow-flashes.
Phase 2
Test of the diagnosis-compat-
ible system components while
the motorcycle is on the move.
slow-flashes.
ASC/DTC self-diagnosis
completed
The ASC/DTC indicator and
warning light goes out.
Check all the indicator and
warning lights.
ASC/DTC self-diagnosis
not completed
The ASC/DTC function is not
available, because self-dia-
gnosis did not complete. (The
motorcycle has to reach a
defined minimum speed for
the wheel speed sensors to be
checked: 5 km/h)
If an indicator showing an ASC/
DTC fault appears when ASC/
DTC self-diagnosis completes:
You can continue to ride. Bear
in mind that the ASC/DTC
function is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Running in
Engine
Until the first running-in check,
vary the throttle opening and
engine-speed range frequently;
avoid riding at constant engine
rpm for prolonged periods.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads.
Comply with the rpm limits for
running in.
Running-in speeds
<5000 min -1 (Odometer read-
ing 0...1000 km)
no full throttle (Odometer
reading 0...1000 km)
Note the mileage after which
the running-in check should be
carried out.
6
93
z Riding