BMW Motorrad R 1200R 2014, Rider'S Manual

Page: 85 / 231

Adjusting headlight beam
throw
If, for a high load, the adjust-
ment of the spring pre-load is
no longer sufficient not to dazzle
oncoming traffic:
Slacken screws 1 with the tool
from the on-board toolkit.
NOTICE
Do not place the motorcycle on
its centre stand or side stand.
Pivot the headlight down
slightly (depending on the load
carried on the motorcycle) to
shorten the headlight beam
throw.
When the motorcycle is again
ridden with a lower load:
Have the basic settings of the
headlight restored by a special-
ist workshop, best of all by a
BMW Motorrad dealer.
Tighten screws
1 with the tool
from the on-board toolkit.
Clutch
Adjusting the clutch lever
WARNING
Adjusting the clutch lever
while riding
Risk of accident
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
Turn knob 1 to the desired po-
sition.
NOTICE
The adjuster is easier to turn
if you push the clutch lever
forward.
Four settings are possible:
Position 1: smallest span
between handlebar grip and
clutch lever
Position 4: largest span
between handlebar grip and
clutch lever
5
83
z Adjustment