BMW Motorrad R 1200 S 2007, Rider'S Manual

Page: 100 / 153

Lift front wheel and install
quick-release axle
6 with
appropriate torque.
Quick-release axle in axle
mount
37 lb/ft (50 Nm)
Tighten axle clamping screw 5
with appropriate torque.
Clamping screw of quick-
release axle
14 lb/ft (19 Nm)
Remove front wheel stand.
Ease brake calipers onto brake
disks.
With OE Anti-Lock Brake System
(ABS):
The cable of the ABS sen-
sor could chafe through if
it comes into contact with the
brake disk.
Ensure installation of the ABS
sensor cable close to the front
suspension.
Route ABS sensor cable 4 as
shown in picture.
Install mounting screws 2 with
appropriate torque.
Brake caliper on slider
tube
22 lb/ft (30 Nm)
Remove adhesive tape from
wheel rim.
8
98
z Maintenance
ProCarManuals.com