BMW Motorrad R 1200 RT 2007, Rider'S Manual, Page: 39 / 175

ASC intervention
ASC warning light quick-
flashes.
The ASC has detected a degree
of instability at the rear wheel
and has intervened to reduce
torque. The warning light flashes
for longer than ASC intervention
lasts. This affords the rider visual
feedback on control intervention
even after the critical situation
has been dealt with.
Self-diagnosis not completed
ASC warning light slow-
flashes.
Self-diagnosis did not complete,
so the ASC function is not avail-
able. The engine must be run-
ning and the motorcycle must
reach a speed of at least 5 km/h
in order for ASC self-diagnosis to
complete.
Pull away slowly. Bear in mind
that the ASC function is not
available until self-diagnosis has
completed.
ASC deactivated
ASC warning light shows.
The rider has switched off the
ASC system.
with OE Automatic Stability
Control (ASC):
Activate the ASC function
(
62)
ASC fault
ASC warning light shows.
The ASC control unit has detec-
ted a fault. The ASC function is
not available.
You can continue to ride. Bear
in mind that the ASC function
is not available. Bear in mind
the more detailed information
on situations that can lead to
an ASC fault (
95).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
RDC warnings
OE
Mode of presentation
Warning symbol 2 indicates a
critical tyre pressure; the corres-
ponding reading flashes.
If the critical value is close to the
limit of the permissible tolerance
range, 'General' warning light
1
shows yellow. If the tyre pres-
sure registered by the sensor is
3
37
z Status indicators
ProCarManuals.com