BMW Motorrad R 1200 RT 2007, Rider'S Manual, Page: 128 / 175

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Turn the handlebars to the
left to facilitate access.
Turn cover 1 counter-clock-
wise and remove it.
Remove the high-beam/low-
beam headlight bulb (
127)
Install the high-beam/low-beam
headlight bulb (
127)
Install cover 1 .
Check that the bulb is cor-
rected seated (by looking in
through the headlight lens).
Replacing right low-beam
headlight bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Turn the handlebars to the
left to facilitate access.
Turn cover 1 counter-clock-
wise and remove it.
Remove the high-beam/low-
beam headlight bulb (
127)
Install the high-beam/low-beam
headlight bulb (
127)
8
126
z Maint
e
nance
ProCarManuals.com