BMW Motorrad K 1600GTL, Rider'S Manual

Page: 97 / 315

Proceed as follows to complete
logon:
Switch off the ignition.
Three sound signals.
Logon is also cancelled in the
following cases
Four remote controls have
been logged on.
If no buttons are pressed within
30 seconds after having logged
on the first remote control.
Synchronising remote
controls
with central locking system OE
with anti-theft alarm (DWA)
OE
without Keyless Ride
OE
If the central locking system
stops responding to the signals
from a remote control, the unit in
question has to be synchronised.
This can happen, for example, if
the buttons on the remote con-
trol were pressed too frequently
while the remote control was out
of range of the anti-theft alarm.
The procedure for synchron-
ising the remote controls is as
follows:
Switch on the ignition.
Press and hold down buttons 1
and 2 .
LED 3 flashes for approxim-
ately ten seconds.
When LED
3 stops flashing,
release buttons 1 and 2 .
LED 3 lights up.
Press button 1 or button 2 .
LED 3 goes out.
Replacing battery of
remote control
with central locking system
OE
with anti-theft alarm (DWA) OE
without Keyless Ride OE
If you press a button on the re-
mote control and the LED does
not show or lights up only briefly:
Replace the battery of remote
control.
Open lid of battery compart-
ment
1 .
Dispose of the old battery in
accordance with all applicable
laws and regulations; do not
4
95
z Operation