BMW Motorrad K 1600GTL, Rider'S Manual

Page: 56 / 315

and has intervened to reduce
torque. The indicator light
flashes for longer than the DTC
intervention lasts. This affords
the rider visual feedback on
control intervention even after the
critical situation has been dealt
with.
DTC self-diagnosis not
completed
The DTC indicator light
flashes slowly.
Possible cause:
Self-diagnosis did not complete,
so the DTC function is not avail-
able. The engine must be run-
ning and the motorcycle must
reach a minimum speed of 5
km⁄h to complete DTC self-dia-
gnosis..
Pull away slowly. Bear in mind
that the DTC function is not
available until self-diagnosis has
completed.
DTC switched off
The DTC indicator light
lights up.
Possible cause:
The rider has switched off the
DTC system.
Switch on DTC.
DTC fault
The DTC indicator light
lights up.
Possible cause:
The DTC control unit has detec-
ted a fault. The DTC function is
not available.
You can continue to ride. Bear
in mind that the DTC function
is not available. Bear in mind
the more detailed information
on situations that can lead to a
DTC fault (
154).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
D­ESA fault
General warning light lights
up yellow.
The symbol for D­ESA fault
is displayed.
Possible cause:
The D­ESA control unit has de-
tected a fault. In this condition,
the motorcycle has too much
damping and is uncomfortable to
drive, especially on roads in poor
condition.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Range
The range readout indic-
ates how far you can ride
with the fuel remaining in the
3
54
z Status indicators