BMW Motorrad K 1600B Series, Rider'S Manual

Page: 82 / 221

If the central locking system
stops responding to the sig-
nals from a remote control unit
then the unit will need to be
resynchronized. This scenario
can arise (for example) after the
remote-control unit's buttons
have been pressed frequently
while the unit was beyond the
range of the alarm system.
The procedure for synchroniz-
ing the remote controls is as
follows:
Switch on the ignition.
Press and hold down buttons 1
and 2 until LED 3 stops flash-
ing.
LED
3 flashes for about ten
seconds.
Release buttons
1 and 2 .
LED 3 is illuminated.
Press button 1 or button 2 .
LED 3 goes out.
Replacing battery in the
remote-control unit
with central locking system
OE
with anti-theft alarm system
(DWA)
OE
without Keyless Ride OE
If the LED lamp on the remote-
control unit fails to light up when
a button is pressed, or only lights
up briefly:
Replace the battery in the
remote-control unit.
Open lid of battery compart-
ment
1 .
Dispose of the old battery in
accordance with legal regula-
tions. Do not dispose of the
battery in the household waste.
4
80
z Operation