BMW Motorrad K 1600B Series, Rider'S Manual

Page: 81 / 221

If a remote key has been mis-
laid and a replacement acquired
or if you are going to use an ad-
ditional remote key, you must
invariably log on all the remote
keys in the set.
Enable logon of the remote
keys as follows:
Switch on the ignition.
Press button 2 on the remote
key three times.
One acoustic signal sounds.
Turn off the ignition within ten
seconds.
Press button 2 on the remote
key three times.
One acoustic signal sounds.
Turn on the ignition within ten
seconds.
You can now proceed to log on
all the remote keys.
Step through the following pro-
cedure with each remote key in
turn:
Press and hold down buttons 1
and 2 until LED 3 stops flash-
ing.
LED
3 flashes for about ten
seconds.
Release buttons 1 and 2 .
LED 3 is illuminated.
Actuate the
1
button or
2
but-
ton.
One acoustic signal sounds
and LED
3 goes out.
To complete logon:
Turn off ignition.
Three acoustic signals are is-
sued.
Logon is also ended
when four remote keys have
been logged on.
if you have logged on the first
remote key and then do not
press a button within approxi-
mately 30 seconds.
Synchronizing the
remote-control units
with central locking system
OE
with anti-theft alarm system
(DWA)
OE
without Keyless Ride OE
4
79
z Operation